Farmall IH International Char Lynn power steering end cap assembly # 374898r93

Description

One, new, complete, remanufactured, power steering hand pump, control end cap assembly for Farmall 240, 340, 404, 504, 2504 or International Harvester tractors 240 if you have the two port power IH steering unit (torque generator) that was supplied by Char Lynn. This end cap assembly comes complete with ALL NEW bearing race, needle bearing, O-rings, retainers and seals as shown in the parts manual. This complete assembly is ready to mount on your unit. The race and bearing is already pressed in to the new aluminum cap and the seals are already worked into their grooves.
This end cap fits the hydraulic power steering unit (torque generator)  373069r91, 373069r92, 373069r93 and 373069r94 and is the end right under the steering wheel that you see sticking up through the dash. This is the aluminum end cap that you are likely to break when you are changing out a rusted on steering wheel. This is also the end cap that you need if you want to upgrade your older r91-r92 version caps with the seal on the end. Those old caps keep blowing out the seals. This new cap has a retainer ring holding everything in place.
All you need to do on this unit is take your old control end cap assembly off and save the control shaft thrust bearing race and steering stub shaft. Put the new o-ring that is furnished onto that race and reassemble the shaft into the new cap using the new stainless ball bearings that are also furnished. It is just that easy. All the pre-assembly work has been done and all parts match Char Lynn Specs in exact detail. This end cap will NOT fit the 4 port PS unit on these same models. Check your parts manual if you have questions or concerns. This is a great new item and is ready to go back on your failed unit. IH part number for this complete assembly is 374898r93. The 22 items in this assembly are;
374898 r93   end cap -new
371221 r91   bearing  -new
355965 r1     o-ring    -new
368109 r1     o-ring    -new
374528 r1     race      -new
382110 r1     retainer  -new
382111 r1      ring        -new
372764 r1     o-ring     -new
16006r1 x 14 ball bearings- new
As you may already know, this end cap assembly and all of it's associated internal parts are no longer available from CNH or Char Lynn as they were discontinued many years ago. Free domestic shipping to US 48 states. Contact me if you have questions about these torque generators as I have several parts here and I rebuild these units.